OCCUPANT DETECTION SENSOR INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. INSTALL OCCUPANT DETECTION SENSOR (FRONT SEAT CUSHION PAD WITH COVER)

    Tech Tips

    The occupant detection sensor cannot be removed from the front seat cushion pad with cover as they are a unit.


    1. Temporarily install the occupant detection sensor (front seat cushion pad with cover).

      Note

      Be careful not to damage the front seat cushion pad with cover.

    2. B004EDE

      Engage the 7 hooks.

    3. B004GUP

      Engage the hook.

    4. B004EHJ

      Install the clip.

    5. B004E42

      Engage the claw to install the connector.

    6. B004FSS

      Connect the connector.

    7. w/ Seat Heater System:


      1. B004F3W

        Connect the 2 connectors.

      2. Engage the 3 clamps.

      3. B004E14

        Engage the clamp.

      4. Connect the connector.

    8. B004EK2C01
      B004FOV Fastener

      Engage the fastener to secure the front seat airbag assembly wire harness.

  2. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  3. INSTALL FRONT SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  4. INSTALL INNER NO. 1 FRONT SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  5. CONNECT FRONT SEATBACK PAD WITH COVER

    Tech Tips

    Use the same procedure as for the driver seat

    Click here

  6. INSTALL FRONT SEAT ASSEMBLY

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here