OCCUPANT DETECTION SENSOR REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  2. DISCONNECT FRONT SEATBACK PAD WITH COVER

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  3. REMOVE INNER NO. 1 FRONT SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  4. REMOVE FRONT SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  5. REMOVE FRONT SEAT INNER CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  6. REMOVE OCCUPANT DETECTION SENSOR (FRONT SEAT CUSHION PAD WITH COVER)

    Tech Tips

    The occupant detection sensor cannot be removed from the front seat cushion pad with cover as they are a unit.


    1. B004EK2C01
      B004FOV Fastener

      Disengage the fastener and separate the front seat airbag assembly wire harness.

    2. w/ Seat Heater System:


      1. B004E14

        Disconnect the connector.

      2. Disengage the clamp.

      3. B004F3W

        Disengage the 3 clamps.

      4. Disconnect the 2 connectors.

    3. B004FSS

      Disconnect the connector.

    4. B004E42

      Disengage the claw to separate the connector.

    5. B004EHJ

      Remove the clip.

    6. B004GUP

      Disengage the hook.

    7. B004EDE

      Disengage the 7 hooks and remove the occupant detection sensor (front seat cushion pad with cover).