FRONT SEAT CUSHION HEATER INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT CUSHION PAD WITH COVER


    1. A01OAQYC13
      *A for Front Right Seat
      *B for Front Left Seat
      *a

      Component without harness connected

      (Front Seat Cushion Pad with Cover)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for Front Right Seat
      Tester Connection Condition Specified Condition
      a6-2 - B-1 Always Below 1 Ω
      a6-5 - B-2 Always Below 1 Ω
      a6-1 - a6-7 Seat heater temperature 15 to 30°C (59 to 86°F) 6.4 to 12.5 kΩ
      B-5 - a6-3 Always Below 1 Ω
      B-3 - a6-3 Always 2.48 to 3.02 Ω
      B-3 - C-1 Always Below 1 Ω
      C-2 - a6-3 Always Below 1 Ω
      for Front Left Seat
      Tester Connection Condition Specified Condition
      b7-2 - D-1 Always Below 1 Ω
      b7-5 - D-2 Always Below 1 Ω
      b7-1 - b7-7 Seat heater temperature 15 to 30°C (59 to 86°F) 6.4 to 12.5 kΩ
      D-5 - b7-3 Always Below 1 Ω
      D-3 - b7-3 Always 2.48 to 3.02 Ω
      D-3 - E-1 Always Below 1 Ω
      E-2 - b7-3 Always Below 1 Ω

      If the result is not as specified, replace the front seat cushion pad with cover.