FRONT SEAT ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE SEAT POSITION AIRBAG SENSOR (for Driver Side)

    Click here

  2. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)

    Click here

  3. DISCONNECT FRONT SEATBACK PAD WITH COVER


    1. B004E70

      Disengage the 2 hooks to disconnect each rubber band of the front seatback pad with cover.

  4. REMOVE INNER NO. 1 FRONT SEAT CUSHION SHIELD


    1. B004EG0

      Remove the screw.

    2. B004GWO

      Disengage the clamp.

    3. B004F88C01
      B004EIV Slide

      Disengage the inner No. 1 front seat cushion shield from the clip as shown in the illustration.

    4. B004F5O

      Disengage the claw.

    5. B004FLVC01
      B004EIV Slide

      Disengage the 2 claws as shown in the illustration.

    6. B004EDO

      Disengage the 3 guides to remove the inner No. 1 front seat cushion shield.

    7. B004GSR

      Remove the clip.

  5. REMOVE FRONT SEAT CUSHION SHIELD


    1. B004G9K

      Disengage the claw and 3 guides.

    2. B004EZX

      Disengage the 2 guides and clip to remove the front seat cushion shield.

    3. B004GWS

      Disengage the 2 clamps.

    4. B004E8F

      Disengage the 3 claws and open the wire harness cover.

    5. B004FTQ

      Disconnect the 2 connectors from the position control ECU and switch assembly.

    6. for Driver Side:


      1. B004FTZ

        Disconnect the connector from the front lumbar power seat switch.

  6. REMOVE FRONT SEAT INNER CUSHION SHIELD


    1. B004EET

      Remove the screw.

    2. B004GK1

      Disengage the 2 claws and 3 guides to remove the front seat inner cushion shield.

  7. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

    Click here

  8. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

    Click here

  9. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. B004F05

      Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.

  10. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. B004FB9

      Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.

  11. REMOVE POSITION CONTROL ECU AND SWITCH ASSEMBLY

    Click here

  12. REMOVE FRONT LUMBAR POWER SEAT SWITCH (for Driver Side)

    Click here

  13. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    1. B004EKP

      Disconnect the connector.

    2. B004GTS

      Disconnect the connector.

    3. Disengage the clamp.

    4. B004GDZC01
      B004FOV Fastener

      Disengage the fastener and separate the front seat airbag assembly wire harness.

    5. B004E4R

      Disengage the claw and 3 clamps.

      Tech Tips

      Disengage the 3 clamps first.

    6. w/ Seat Heater System:


      1. B004EIW

        Disconnect the connector.

      2. Disengage the clamp.

    7. B004E2M

      Remove the clip.

    8. B004E7Z

      Using a T40 "TORX" socket wrench, remove the 4 bolts and separate type front seatback assembly from the separate type front seat cushion assembly.

  14. REMOVE RECLINING REMOTE CONTROL CAP


    1. B004FF1

      Disengage the claw and 2 guides to remove the reclining remote control cap.

  15. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY


    1. B004F1J

      Remove the 2 screws.

    2. B004E5E

      Disengage the 2 guides to separate the reclining remote control lever sub-assembly.

    3. B004EO0

      Disconnect the reclining adjuster equalizing cable assembly to remove the reclining remote control lever sub-assembly.

  16. REMOVE FRONT SEAT HEADREST SUPPORT


    1. B004G10

      Remove the 3 hog rings.

    2. B004EKOC01
      B004FOV Fastener

      Disengage the 2 fasteners.

    3. B004F2YC01
      B004FOV Tab

      Pull out the 2 tabs.

    4. B004GR2

      Open the 2 fasteners.

    5. B004FOI

      Disengage each claw and remove the 2 front seat headrest supports.

  17. REMOVE FRONT SEATBACK PAD WITH COVER


    1. w/ Climate Control Seat System:


      1. B004G7Z

        Disengage the 2 claws to separate the seatback climate control blower from the front seatback pad with cover.

    2. B004E86C01
      *a Bracket

      Remove the 2 nuts and disengage the 2 brackets.

    3. Remove the front seatback pad with cover.

  18. REMOVE FRONT SEAT AIRBAG ASSEMBLY

    Click here

  19. REMOVE SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)


    1. B004E2A

      Disconnect the connector.

    2. Remove the clip.

    3. B004EK6

      Remove the seatback climate control blower.

  20. REMOVE LH SEAT RECLINING ADJUSTER INSIDE COVER LH


    1. B004F2U

      Remove the screw.

    2. Disengage the guide to remove the LH seat reclining adjuster inside cover LH.

  21. REMOVE LH SEAT RECLINING ADJUSTER INSIDE COVER RH


    1. B004FPQ

      Remove the screw.

    2. Disengage the guide to remove the LH seat reclining adjuster inside cover RH.

  22. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    1. B004EFF

      Disengage the claw to remove the reclining adjuster inside cover LH.

  23. REMOVE RECLINING ADJUSTER INSIDE COVER RH

    Tech Tips

    Perform the same procedure as for the LH side.

  24. REMOVE LIMIT SWITCH ASSEMBLY (for LH Side)


    1. B004ERD

      Remove the screw.

    2. Disengage the 2 guides to remove the limit switch assembly.

  25. REMOVE LIMIT SWITCH ASSEMBLY (for RH Side)


    1. B004FDY

      Disconnect the connector.

    2. Remove the screw.

    3. Disengage the 2 guides to remove the limit switch assembly.

  26. REMOVE FRONT SEATBACK EDGE PROTECTOR


    1. B004EVY

      Disengage each claw to remove the 2 front seatback edge protectors from the front seatback frame sub-assembly.

  27. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Driver Side)

    Click here

  28. REMOVE FRONT SEATBACK SPRING SUB-ASSEMBLY (for Front Passenger Side)


    1. B004GW0

      Remove the clamp.

    2. B004EZ9

      Disengage the 2 claws.

    3. Disengage the 2 guides to remove the front seatback spring sub-assembly from the front seatback frame sub-assembly.

  29. REMOVE FRONT SEATBACK HOOK (for Driver Side)


    1. Remove the 2 front seatback hooks from the lumbar support adjuster assembly.

  30. REMOVE FRONT SEATBACK HOOK (for Front Passenger Side)


    1. Remove the 2 front seatback hooks from the front seatback spring sub-assembly.

  31. REMOVE RECLINING ADJUSTER EQUALIZING CABLE ASSEMBLY


    1. B004EN6N01

      Remove the clamp (B) and disengage the clamp (A).

    2. B004EMF

      Disconnect the reclining adjuster equalizing cable assembly to remove it.

  32. REMOVE NO. 2 FRONT SEAT WIRE


    1. Disconnect each connector and disengage each clamp to remove the No. 2 front seat wire.

  33. REMOVE FRONT SEAT CUSHION PAD WITH COVER


    1. w/ Seat Heater System:


      1. B004F7R

        Disengage the 3 clamps.

      2. Disconnect the connector.

    2. for Front Passenger Side:


      1. B004E42

        Disengage the claw to separate the connector.

    3. B004GRM

      Disengage the hook.

    4. B004G6M

      Disengage the 7 hooks and remove the front seat cushion pad with cover.

  34. REMOVE SEAT CUSHION CLIMATE CONTROL DUCT (w/ Climate Control Seat System)


    1. B004FJJ

      Disengage the 2 claws and remove the seat cushion climate control duct from the seat cushion climate control blower assembly.

  35. REMOVE SEAT CUSHION CLIMATE CONTROL BRACKET (w/ Climate Control Seat System)


    1. B004GC4

      Remove the 2 screws and seat cushion climate control bracket from the seat cushion climate control blower assembly.

  36. REMOVE SEAT CUSHION CLIMATE CONTROL BLOWER ASSEMBLY (w/ Climate Control Seat System)


    1. B004F8X

      Disconnect the connector.

    2. B004G7J

      Remove the seat cushion climate control blower assembly.

  37. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH


    1. B004ESEN01

      Disengage the clip (A).

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip (B) to remove the front seat lower cushion shield LH.

  38. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH


    1. B004FDM

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip to remove the front seat lower cushion shield RH.

  39. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH


    1. B004GM5

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector LH.

  40. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH

    Tech Tips

    Perform the same procedure as for the LH side.

  41. REMOVE FRONT SEAT CUSHION SPRING SUB-ASSEMBLY


    1. w/ Climate Control Seat System:


      1. B004EPY

        Disengage the clamp.

    2. B004FA0

      Disengage the 6 hooks to remove the front seat cushion spring sub-assembly from the front seat adjuster assembly.

  42. REMOVE FRONT SEAT WIRE


    1. Disconnect each connector and disengage each clamp to remove the front seat wire.

  43. REMOVE SEAT ADJUSTER COVER CAP


    1. B004EYR

      Remove the 2 seat adjuster cover caps.