FRONT SEAT SIDE AIRBAG ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEAT AIRBAG ASSEMBLY

    CAUTION:


    • Do not reuse the nuts.

    • Make sure that the front seatback frame sub-assembly is not deformed. If it is deformed, replace it with a new one.


    1. Install the front seat airbag assembly with 2 new nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Engage the 2 clamps.

    3. B004F50C01
      B004FOV Fastener

      Engage the fastener to secure the front seat airbag assembly wire harness.

    4. B004E82

      Engage the claw and 3 clamps to connect the front seat airbag assembly wire harness as shown in the illustration.

      Tech Tips

      Engage the claw first.

  2. INSTALL FRONT SEATBACK PAD WITH COVER

    Click here

  3. INSTALL FRONT SEAT HEADREST SUPPORT

    Click here

  4. INSTALL RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY

    Click here

  5. INSTALL RECLINING REMOTE CONTROL CAP

    Click here

  6. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  7. INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  8. INSTALL INNER NO. 1 FRONT SEAT CUSHION SHIELD

    Click here

  9. CONNECT FRONT SEATBACK PAD WITH COVER

    Click here

  10. INSTALL FRONT SEAT ASSEMBLY

    Click here

  11. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here