BACK DOOR OUTSIDE GARNISH INSTALLATION

PROCEDURE

1. INSTALL NO. 1 BACK DOOR NAME PLATE

   
   

   1. Engage the 2 guide and 4 claws to install the No. 1 back door name plate.

2. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

   
   
   1. 

      *1	Lower Back Window Moulding
      *2	Back Door Outside Garnish Sub-assembly
      *a	Tape
      *b	Protective Tape
      	Install in this Direction

      Pull back the lower back window moulding and secure it with tape as shown in the illustration.

      Note

      Be careful not to damage the lower back window moulding.

   2. Engage the 2 claws and 10 clips as shown in the illustration.

      Tech Tips

      Check that the lower back window moulding is not caught under the back door outside garnish sub-assembly.

   3. Install the back door outside garnish sub-assembly with the 4 bolts.

      Torque:

      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

   4. w/ Touchless Power Back Door:

      
      

      1. Connect the connector.

3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY

   Click here

4. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

5. INSTALL BACK DOOR FINISH COVER LH (w/o Power Back Door)

   Click here

6. INSTALL BACK DOOR FINISH COVER RH (w/o Power Back Door)

   Tech Tips

   Use the same procedure as for the LH side.

7. INSTALL DOOR PULL HANDLE (w/ Power Back Door)

   Click here

8. INSTALL BACK DOOR TRIM BASE (w/ Power Back Door)

   Click here

9. INSTALL BACK DOOR LOCK COVER

   Click here

10. INSTALL BACK DOOR TRIM COVER LH

    Click here

11. INSTALL BACK DOOR TRIM COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

12. INSTALL BACK WINDOW UPPER PANEL TRIM

    Click here