BACK DOOR OUTSIDE GARNISH REMOVAL

PROCEDURE

1. REMOVE BACK WINDOW UPPER PANEL TRIM (w/o Rear No. 2 Seat)

   Click here

2. REMOVE BACK WINDOW UPPER PANEL TRIM (w/ Rear No. 2 Seat)

   Click here

3. REMOVE BACK DOOR TRIM COVER LH (w/o Rear No. 2 Seat)

   Click here

4. REMOVE BACK DOOR TRIM COVER LH (w/ Rear No. 2 Seat)

   Click here

5. REMOVE BACK DOOR TRIM COVER RH

   Tech Tips

   Use the same procedure as for the LH side.

6. REMOVE BACK DOOR LOCK COVER (w/o Rear No. 2 Seat)

   Click here

7. REMOVE BACK DOOR LOCK COVER (w/ Rear No. 2 Seat)

   Click here

8. REMOVE BACK DOOR FINISH COVER LH (w/o Power Back Door)

   Click here

9. REMOVE BACK DOOR FINISH COVER RH (w/o Power Back Door)

   Tech Tips

   Use the same procedure as for the LH side.

10. REMOVE BACK DOOR TRIM BASE (w/ Power Back Door)

    Click here

11. REMOVE DOOR PULL HANDLE (w/ Power Back Door)

    Click here

12. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

13. REMOVE BACK DOOR TRIM PANEL ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

14. REMOVE BACK DOOR TRIM PANEL ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

15. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    
    

    1. w/ Touchless Power Back Door

       
       

       1. 

          Disconnect the connector.

    2. 

       Remove the 4 bolts.

    3. 

       Protective Tape

       Apply protective tape around the back door outside garnish sub-assembly.

    4. 

       Remove in this Direction

       Disengage the 2 claws and 10 clips as shown in the illustration to remove the back door outside garnish sub-assembly.

16. REMOVE NO. 1 BACK DOOR NAME PLATE

    
    

    1. 

       Disengage the 4 claws and 2 guides to remove the No. 1 back door name plate.