REAR DOOR OUTSIDE MOULDING REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE REAR DOOR OUTSIDE MOULDING SUB-ASSEMBLY

   
   

   1. 

      Disengage the clip.

   2. 

      Remove in this Direction

      Using a moulding remover, disengage the 5 claws and turn back the rear door outside moulding sub-assembly as shown in the illustration.

   3. 

      Remove the hole plug.

   4. 

      Remove the nut.

   5. 

      Protective Tape

      Apply protective tape around the rear door outside moulding sub-assembly as shown in the illustration.

   6. 

      Using a moulding remover, disengage the 6 clips to remove the rear door outside moulding sub-assembly.

2. REMOVE REAR DOOR LOWER OUTSIDE MOULDING SUB-ASSEMBLY

   
   

   1. 

      Remove in this Direction

      Remove the screw and turn back the rear door lower outside moulding sub-assembly as shown in the illustration.

   2. 

      Protective Tape

      Apply protective tape around the rear door lower outside moulding sub-assembly as shown in the illustration.

   3. 

      Remove in this Direction

      Disengage the 5 clips as shown in the illustration to remove the rear door lower outside moulding sub-assembly.

3. REMOVE NO. 3 REAR DOOR WEATHERSTRIP

   
   

   1. 

      Disengage the 7 clips and remove the No. 3 rear door weatherstrip.