FRONT DOOR OUTSIDE MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY


    1. Disengage the 6 clips and turn back the front door outside moulding sub-assembly as shown in the illustration.

      A01RDWUC02
      B005OOA Remove in this Direction - -
    2. A01RFBG

      Remove the hole plug.

    3. A01R9C6

      Remove the nut.

    4. A01RBXCC01
      B005M97 Protective Tape

      Apply protective tape around the front door outside moulding sub-assembly as shown in the illustration.

    5. Using a moulding remover, disengage the 7 clips to remove the front door outside moulding sub-assembly.

      A01REW3

  2. REMOVE NO. 3 FRONT DOOR WEATHERSTRIP


    1. A01RFJ6

      Disengage the 9 clips to remove the No. 3 front door weatherstrip.