ROCKER PANEL MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY

    Click here

  2. REMOVE QUARTER OUTSIDE MOULDING SUB-ASSEMBLY

    Click here

  3. REMOVE NO. 6 ROCKER PANEL MOULDING PROTECTOR

    Click here

  4. REMOVE QUARTER PANEL WHEEL OPENING MOULDING

    Click here

  5. REMOVE ROCKER PANEL MOULDING COVER


    1. A01R9AWC01
      B005OOA Remove in this Direction

      Disengage the 2 claws as shown in the illustration to remove the rocker panel moulding cover.

      Tech Tips

      Use the same procedure for the other rocker panel moulding cover.

  6. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY


    1. Apply protective tape around the rocker panel moulding assembly and door as shown in the illustration.

      A01RBAWC01
      B005M97 Protective Tape - -
    2. A01REIC

      Remove the 2 screws and 9 clips.

    3. A01RF9GC01
      B005OOA Remove in this Direction

      Disengage the 6 clips as shown in the illustration to remove the body rocker panel moulding assembly.