REAR BUMPER(w/ Rear No. 2 Seat) INSTALLATION

PROCEDURE


  1. INSTALL REAR BUMPER ASSEMBLY


    1. w/ LEXUS Parking Assist-sensor System:


      1. Connect the connector.

    2. B005PQUC01
      B005OOA Install in this Direction

      Engage the 2 claws as shown in the illustration.

    3. B005MRXC01
      B005OOA Install in this Direction

      Engage the 6 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. Install the 8 clips.

    5. Install the rear bumper assembly with the 4 screws.

  2. INSTALL LUGGAGE COMPARTMENT SIDE COVER LH (w/o Spare Tire)


    1. B005NIFC01
      *1 Luggage Compartment Side Cover Protector Clip
      B005OOA Install in this Direction

      Engage the 2 luggage compartment side cover protector clips as shown in the illustration.

    2. Install the 6 clips.

    3. Install the luggage compartment side cover LH with the 3 bolts.

  3. CONNECT QUARTER OUTSIDE MOULDING SUB-ASSEMBLY LH


    1. B005PRPC01
      B005OOA Install in this Direction

      Engage the clip and 4 claws as shown in the illustration.

    2. Using a 4 mm hexagon socket wrench, install the screw.

    3. Install the quarter outside moulding sub-assembly LH with the clip.

  4. CONNECT QUARTER OUTSIDE MOULDING SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  5. INSTALL REAR LIGHT COVER LH

    Click here

  6. INSTALL REAR LIGHT COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  7. PERFORM CALIBRATION (w/ Intelligent Clearance Sonar System)

    Click here