HEADLIGHT ECU INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT GASKET


    1. Install a new headlight gasket.

  2. INSTALL HEADLIGHT ECU SUB-ASSEMBLY


    1. for Single Beam Headlight:


      1. Connect the connector.

    2. for Triple Beam Headlight:


      1. Connect the 2 connectors.

    3. Install the connector cover.

    4. Install the headlight ECU sub-assembly with the 3 screws.

      Note

      If the headlight ECU sub-assembly has been struck or dropped, replace it with a new one.

  3. INSTALL HEADLIGHT ASSEMBLY

    for Single Beam Headlight

    Click here

    for Triple Beam Headlight:

    Click here