ADAPTIVE HIGH BEAM MAIN SWITCH INSTALLATION

PROCEDURE

1. INSTALL ADAPTIVE HIGH BEAM MAIN SWITCH ASSEMBLY (INTEGRATION CONTROL AND PANEL ASSEMBLY)

   
   

   1. 

      Install in this Direction

      Engage the 4 claws to install the adaptive high beam main switch assembly (integration control and panel assembly) as shown in the illustration.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

   Click here

3. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

5. INSTALL COWL SIDE TRIM BOARD

   Click here

6. INSTALL FRONT DOOR SCUFF PLATE

   Click here

7. INSTALL INSTRUMENT PANEL GARNISH

   Click here