LICENSE PLATE LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT LICENSE PLATE LIGHT ASSEMBLY LH


    1. A01REDFC05
      *a

      Component without harness connected

      (License Plate Light Assembly LH)

      Apply battery voltage to the license plate light assembly LH and check that the light comes on.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 1 (B)

      Battery negative (-) → Terminal 2 (E)

      		 License plate light comes on

      If the result is not as specified, replace the license plate light assembly LH.

  2. INSPECT LICENSE PLATE LIGHT ASSEMBLY RH


    1. A01REDFC05
      *a

      Component without harness connected

      (License Plate Light Assembly RH)

      Apply battery voltage to the license plate light assembly RH and check that the light comes on.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 1 (B)

      Battery negative (-) → Terminal 2 (E)

      		 License plate light comes on

      If the result is not as specified, replace the license plate light assembly RH.