REAR LIGHT ASSEMBLY REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL REAR LIGHT LENS AND BODY

  2. INSTALL LICENSE PLATE LIGHT SHADE


    1. A01R9DX

      Install 2 new license plate light shades.

  3. INSTALL REAR LIGHT GASKET


    1. A01RCT4

      Install a new rear light gasket.

  4. INSTALL BACK-UP LIGHT SOCKET AND WIRE


    1. A01R8ZN

      Connect the connector to install the back-up light socket and wire.

  5. INSTALL BACK-UP LIGHT BULB


    1. Install the back-up light bulb to the back-up light socket and wire.

    2. A01RBY0C01
      B005OOA Install in this Direction

      Turn the back-up light socket and wire with the back-up light bulb as shown in the illustration to connect them as a unit.