REAR LIGHT ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE BACK-UP LIGHT BULB


    1. A01R9YAC01
      B005OOA Remove in this Direction

      Turn the back-up light socket and wire with the back-up light bulb as shown in the illustration to disconnect them as a unit.

    2. Remove the back-up light bulb from the back-up light socket and wire.

  2. REMOVE BACK-UP LIGHT SOCKET AND WIRE


    1. A01R8ZN

      Disconnect the connector to remove the back-up light socket and wire.

  3. REMOVE REAR LIGHT GASKET


    1. A01RCT4

      Remove the rear light gasket.

      Note


      • Be sure to remove all traces of the old rear light gasket from the vehicle body.

      • Do not reuse the removed rear light gasket. Be sure to install a new rear light gasket to prevent water ingress.

  4. REMOVE LICENSE PLATE LIGHT SHADE


    1. A01R9DX

      Remove the 2 license plate light shades.

      Note


      • Be sure to remove all the traces of the old license plate light shade from the vehicle body.

      • Do not reuse the removed license plate light shade. Be sure to install a new license plate light shade to prevent water ingress.

  5. REMOVE REAR LIGHT LENS AND BODY