FRONT TURN SIGNAL LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE FRONT TURN SIGNAL LIGHT BULB


    1. Turn the steering wheel fully to the right.

      Tech Tips

      When removing the front turn signal light bulb of the headlight assembly RH, turn the steering wheel to the left.

    2. A01RCXG

      Remove the 3 clips and separate the front fender splash shield sub-assembly.

    3. A01RCSGC01
      B005OOA Remove in this Direction

      Disengage the clamp.

    4. Turn the headlight cord with the front turn signal light bulb as shown in the illustration to disconnect them as a unit.

    5. Remove the front turn signal light bulb from the headlight cord.

  2. INSTALL FRONT TURN SIGNAL LIGHT BULB


    1. Install a new front turn signal light bulb to the headlight cord.

    2. A01RF6EC01
      B005OOA Install in this Direction

      Turn the headlight cord with the front turn signal light bulb as shown in the illustration to connect them as a unit.

    3. Engage the clamp.

    4. A01RCXG

      Install the front fender splash shield sub-assembly with the 3 clips.

    5. Turn the steering wheel to its original position.