STOP LIGHT SWITCH INSTALLATION

PROCEDURE


  1. INSTALL STOP LIGHT SWITCH ASSEMBLY


    1. B005N86C01
      *a Stop Light Switch Lock Nut
      B005OOA Install in this Direction

      Temporarily install the stop light switch assembly with stop light switch lock nut as shown in the illustration.

    2. B005O4CC04
      *1 Stop Light Switch Assembly
      *a Cushion
      *b Stop Light Switch Lock Nut

      Turn the stop light switch assembly so that the clearance between the end of the threads and the cushion is within (A).

      Length Measurement
      A 0.5 to 2.4 mm (0.0343 to 0.0945 in.)

    3. Tighten the stop light switch lock nut.

      Torque:
      16.7 N*m  { 170 kgf*cm, 12 ft.*lbf }

    4. Connect the connector.

    5. If the protrusion is not as specified, recheck the stop light switch assembly installation and perform brake pedal adjustment if necessary.

      for LHD
      Click here Click here
      for RHD
      Click here Click here

      Note

      Do not depress or support the brake pedal.

  2. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY

    Click here