CORNERING LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT CORNERING LIGHT ASSEMBLY LH


    1. A01RB3FC03
      *a

      Component without harness connected

      (Cornering Light Assembly LH)

      Apply battery voltage to the cornering light assembly LH and check the light comes on.

      OK
      Condition Specified Condition

      Battery positive (+) → 1 (B) and 2 (CRPL)

      Battery negative (-) → 3 (E)

      		 Cornering light comes on

      If the result is not as specified, replace the cornering light assembly LH.

  2. INSPECT CORNERING LIGHT ASSEMBLY RH


    1. A01RB3FC04
      *a

      Component without harness connected

      (Cornering Light Assembly RH)

      Apply battery voltage to the cornering light assembly RH and check the light comes on.

      OK
      Condition Specified Condition

      Battery positive (+) → 1 (B) and 2 (CRPR)

      Battery negative (-) → 3 (E)

      		 Cornering light comes on

      If the result is not as specified, replace the cornering light assembly RH.