| DTC Code | DTC Name |
|---|---|
| B242C | Right Headlight ECU Malfunction |
| B242D | Left Headlight ECU Malfunction |
DESCRIPTION
These DTCs are stored if the headlight ECU sub-assembly LH or RH detects an internal malfunction. The headlight ECU sub-assembly LH stores DTC B242C or B242D.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| B242C | Right Headlight ECU Malfunction | An internal malfunction occurs in the headlight ECU sub-assembly RH | Headlight ECU sub-assembly RH | - |
| B242D | Left Headlight ECU Malfunction | An internal malfunction occurs in the headlight ECU sub-assembly LH | Headlight ECU sub-assembly LH | - |
CAUTION / NOTICE / HINT
Note
If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH.
PROCEDURE
CLEAR DTC
for Single Beam Headlight:
Clear the DTCs.
for Triple Beam Headlight:
Clear the DTCs.
| Result | ||
|---|---|---|
|
| NEXT |
|
CHECK FOR DTC
Turn the engine switch on (IG).
for Single Beam Headlight:
Check for DTCs.
| OK |
|---|
| DTC B242C and B242D are not output. |
for Triple Beam Headlight:
Check for DTCs.
| OK |
|---|
| DTC B242C and B242D are not output. |
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| A |
|
USE SIMULATION METHOD TO CHECK Click here |
| B |
|
REPLACE HEADLIGHT ECU SUB-ASSEMBLY RH Click here |
| C |
|
REPLACE HEADLIGHT ECU SUB-ASSEMBLY LH Click here |