WASHER LEVEL WARNING SWITCH INSTALLATION

PROCEDURE

1. INSTALL LEVEL WARNING SWITCH ASSEMBLY

   
   
   1. 

      *a	Protrusion
      *b	Marking
      	Install in this Direction

      Install the level warning switch assembly as shown in the illustration.

      Note

      Make sure that the protrusion of the level warning switch assembly is between the 2 markings.

   2. Connect the connector.

2. ADD WASHER FLUID

   Click here

3. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

   Click here

4. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

   Click here

5. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

6. INSTALL FRONT WHEEL RH

   Click here