WASHER NOZZLE(for Front Side) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL WASHER NOZZLE SUB-ASSEMBLY (w/o Heater)


    1. Connect a new washer nozzle sub-assembly to the washer hose.

    2. A01R8Z6C02
      B005OOA Install in this Direction (1)
      B005OMH Install in this Direction (2)

      Engage the 2 claws as indicated by the arrows, in the order shown in the illustration to install the washer nozzle sub-assembly.

  2. INSTALL WASHER NOZZLE SUB-ASSEMBLY (w/ Heater)


    1. Tie the string that was passed through the hood sub-assembly to the wire harness of a new washer nozzle sub-assembly.

    2. Pass the wire harness of the washer nozzle sub-assembly through the hood sub-assembly.

    3. Remove the string from the wire harness of the washer nozzle sub-assembly.

    4. Connect the washer nozzle sub-assembly to the washer hose.

    5. A01RFU0C01
      B005OOA Install in this Direction (1)
      B005OMH Install in this Direction (2)

      Engage the 2 claws as indicated by the arrows, in the order shown in the illustration to install the washer nozzle sub-assembly.

    6. Connect the wire harness of the washer nozzle sub-assembly to the washer hose with the tape.

    7. Connect the connector.

  3. INSPECT WASHER NOZZLE SUB-ASSEMBLY

    Click here

  4. ADJUST WASHER NOZZLE SUB-ASSEMBLY

    Click here

  5. INSTALL HOOD INSULATOR (w/ Heater)

    Click here