WASHER NOZZLE(for Front Side) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. Operate the washer nozzle sub-assemblies and check the position that the washer fluid contacts the windshield.

      Standard
      Center of washer fluid contacts the windshield in the areas shown in the illustration.
      A01RCHCC01
      *a Upper Limit *b Standard
      *c Lower Limit *d Center of washer fluid contact
      B005M97 Measurement - -
      Standard Measurement
      Area Measurement Area Measurement
      A 153.3 mm (6.04 in.) B 44.4 mm (1.75 in.)
      C 543.3 mm (1.78 ft.) D 261.9 mm (10.3 in.)

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.