PROCEDURE
INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY
for Wiper Switch RH Side Type:
| *A | w/ Auto Wiper System |
| *B | w/o Auto Wiper System |
| *a | Component without harness connected (Windshield Wiper Switch Assembly) |
Measure the resistance according to the value(s) in the table below.
| Standard Resistance | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||
|
||||||||||||
|
If the result is not as specified, replace the windshield wiper switch assembly.
for Wiper Switch LH Side Type:
| *A | w/ Auto Wiper System |
| *B | w/o Auto Wiper System |
| *a | Component without harness connected (Windshield Wiper Switch Assembly) |
Measure the resistance according to the value(s) in the table below.
| Standard Resistance | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||
|
||||||||||||
|
If the result is not as specified, replace the windshield wiper switch assembly.