WIPER SWITCH REMOVAL

PROCEDURE


  1. CHANGE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM SETTINGS

    Click here

  2. REMOVE LOWER STEERING COLUMN COVER

    Note

    Removing the lower steering column cover in the incorrect order will cause the parts to break.


    1. A01VVV9

      Turn the steering wheel assembly to the left and remove the screw.

    2. A01VVMJ

      Turn the steering wheel assembly to the right and remove the screw.

    3. A01VVFH

      Remove the screw.

    4. A01VW0TC01
      B005NIZ Push

      Push the left side of the lower steering column cover and disengage the claw as shown in the illustration.

    5. A01VVOPC01
      B005NIZ Push

      Push the right side of the lower steering column cover and disengage the claw as shown in the illustration.

    6. A01VWWFC01
      B005OOA Remove in this Direction

      Disengage the 2 claws to remove the lower steering column cover as shown in the illustration.

  3. REMOVE UPPER STEERING COLUMN COVER


    1. A01VWGO

      Disengage the 2 claws and 4 clips to separate the instrument cluster finish panel sub-assembly.

    2. A01VXX4C01
      B005OOA Remove in this Direction

      Disengage the claw to remove the upper steering column cover as shown in the illustration.

  4. REMOVE TILT AND TELESCOPIC SWITCH (for LH Side)

    Click here

  5. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01VW34

      Disconnect the 2 connectors.

    2. A01VVX2C01
      B005OOA Remove in this Direction

      Using a screwdriver, disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

      Note

      If the claw is pulled with excessive force, it may break.