REAR WIPER MOTOR INSPECTION

PROCEDURE


  1. INSPECT REAR WIPER MOTOR AND BRACKET ASSEMBLY


    1. B005Q0JC30
      *a

      Component without harness connected

      (rear wiper motor and bracket assembly)

      Check the wiper intermittent operation.


      1. Connect a battery positive (+) lead to terminal 4 (+B) and a negative (-) lead to terminal 2 (C1) and terminal 5 (E), and check that the motor operates.

        OK
        Motor operates.

        If the result is not as specified, replace the rear wiper motor and bracket assembly.

    2. Check the wiper continuous operation.


      1. Connect a battery positive (+) lead to terminal 4 (+B) and a negative (-) lead to terminal 3 (LS) and terminal 5 (E), and check that the motor operates.

        OK
        Motor operates.

        If the result is not as specified, replace the rear wiper motor and bracket assembly.