LIGHTING SYSTEM OPERATION CHECK

AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK

1. Turn the engine switch on (IG).

2. Turn the light control switch to the AUTO position.

3. Cover the automatic light control sensor.

4. Check that the taillights and low beam headlights come on.

5. Uncover the automatic light control sensor.

6. Check that the low beam headlights and taillights go off.

LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (except Driver Door-linked Auto Light Turn-off System)

1. When the light control switch is in the tail or head position

   
   

   1. Turn the engine switch on (IG).

   2. Turn the low beam headlights, high beam headlights, or front fog lights on.

   3. Turn the engine switch off.

   4. Check that the low beam headlights, high beam headlights and front fog lights go off immediately.

      Tech Tips

      The taillights and rear fog light remain on.

2. When the light control switch is in the AUTO position

   
   

   1. Turn the engine switch on (IG).

   2. Turn the taillights, low beam headlights, high beam headlights, front fog lights or rear fog light on.

   3. Turn the engine switch off.

   4. Check that all of the lights go off immediately.

LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (for Driver Door-linked Auto Light Turn-off System)

1. Close all of the doors.

2. Turn the engine switch on (IG).

3. Turn the taillights, low beam headlights, high beam headlights and front fog lights on.

4. Turn the engine switch off.

5. Open the driver door.

6. Check that all of the lights go off immediately.

LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (w/ Delay Function)

1. When the taillights are on (low beam headlights are not on)

   
   

   1. Close all of the doors.

   2. Turn the engine switch on (IG).

   3. Turn the taillights on.

   4. Turn the engine switch off.

   5. Open the driver door.

   6. Check that all of the lights go off immediately.

2. When the low beam headlights are on

   
   

   1. Close all of the doors.

   2. Turn the engine switch on (IG).

   3. Turn the low beam headlights on.

   4. Turn the engine switch off.

   5. Open any of the doors.

   6. Close the door.

   7. Check that all of the lights go off after 30 seconds (delay function).

      Tech Tips

      Before the lights go off, if the lock button on the key is pushed after all of the doors are locked, all of the lights will go off immediately.

DAYTIME RUNNING LIGHT SYSTEM OPERATION CHECK

1. Turn the light control switch to the off* or AUTO position (with the taillights not turned on via the automatic light control system).

   
   

   • *: w/ Light Control Switch Off Position

2. Start the engine.

3. Release the parking brake.

4. Check that the daytime running lights come on.

WELCOME LIGHT ILLUMINATION CONTROL OPERATION CHECK

1. Turn the light control switch to the AUTO position.

2. Cover the automatic light control sensor.

3. Turn the engine switch off.

4. Close and lock all doors.

5. Unlock all doors by wireless door unlock or entry door unlock.

6. Check that the clearance lights come on for approximately 15 seconds.

FOLLOW ME HOME SYSTEM OPERATION CHECK (w/ Follow Me Home System)

1. Turn the engine switch off.

2. Turn the light control switch to the AUTO position.

3. Pull the light control switch to flash the headlights once.

4. Check that the low beam headlights come on for approximately 30 seconds.

OUTSIDE HANDLE FOOT LIGHT CONTROL OPERATION CHECK

1. The operation and condition of this control are described below.

   Operation	Condition
   Fade in and illuminate constantly	When any of the following conditions is met, the lights fade in and illuminate constantly: A key is detected in the actuation area. Any door is unlocked when the engine switch is off and all of the doors are closed. The engine switch is off, any door is opened when all doors are closed.
   Illuminate for 15 seconds, and then 2 steps fade out	When any of the following conditions is met, the lights illuminate for 15 seconds, and then in 2 steps fade out: An actuation area-linked function is used.* All doors are closed and then any door is opened. Any door is unlocked when the engine switch is off and all of the doors are closed. The engine switch is off, any door is opened when all doors are closed. Any door is closed or opened.
   Fade out immediately	When the following condition is met, the lights fade out immediately: The engine switch is turned from off to on (ACC) or on (IG).
   2 steps fade out immediately	When any of the following conditions is met, the lights 2 steps fade out immediately: All doors are locked when all doors are closed and any door is unlocked. All doors are locked again when all doors are closed and locked. All doors are closed and then any door is opened.

   Tech Tips

   *: When the lights are on, if the key leaves the actuation areas around the doors, the lights fade out after approximately 3 seconds.

CORNERING LIGHT CONTROL OPERATION CHECK

1. Turn the engine switch on (IG).

2. Turn the light control switch to the HEAD position.

3. Perform the following operations while driving the vehicle at 35 km/h (22 mph) or less and check that the cornering lights operate appropriately.

   
   

   • Operate the right turn signal switch and check that the cornering light RH illuminates.

   • Operate the left turn signal switch and check that the cornering light LH illuminates.

   • Turn the steering wheel 80 degrees or more to the right and check that the cornering light RH illuminates. Turn the steering wheel to an angle of 30 degrees or less and check that the cornering light RH turns off.

   • Turn the steering wheel 80 degrees or more to the left and check that the cornering light LH illuminates. Turn the steering wheel to an angle of 30 degrees or less and check that the cornering light LH turns off.

   • Move the shift lever to R and check that the cornering light LH and cornering light RH illuminate.*

   
   

   • *: w/ Reverse linked cornering light function