OUTER REAR VIEW MIRROR GLASS REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE OUTER MIRROR


    1. A01RFBBC02
      B005M97 Protective Tape

      Apply protective tape to the areas shown in the illustration.

    2. Push the upper part of the mirror surface and tilt it.

    3. Using a moulding remover, disengage the 2 claws on the lower part of the outer mirror as shown in the illustration.

      Note

      Do not push the outer mirror with excessive force. Doing so may cause the actuator to come off or break the mirror surface.

    4. Push the lower part of the mirror surface and tilt it.

    5. A01RB7L

      Using a moulding remover, disengage the 2 claws on the upper part of the outer mirror as shown in the illustration.

      Note

      Do not push the outer mirror with excessive force. Doing so may cause the actuator to come off or break the mirror surface.

    6. A01RABJ

      Disengage the clamp.

    7. Disconnect the 2 connectors to remove the outer mirror.