OUTER REAR VIEW MIRROR INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY

   
   

   1. 

      Engage the 2 guides and claw.

   2. Temporarily install the outer rear view mirror assembly with the 3 nuts.

   3. Tighten the 3 nuts in the order shown in the illustration.

      Torque:

      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

2. INSTALL OUTER MIRROR INSTALL HOLE COVER

   
   

   1. Engage the 2 claws to install the outer mirror install hole cover.

   2. Install the 2 screws.

   3. w/o Panoramic View Monitor System:

      
      

      1. Engage the 3 clamps.

      2. Connect the connector.

   4. w/ Panoramic View Monitor System:

      
      

      1. Engage the 3 clamps.

      2. Connect the 2 connectors.

3. INSTALL OUTER MIRROR PROTECTOR

   
   

   1. Install 2 new outer mirror protectors.

4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

   Click here

5. INSTALL FRONT DOOR NO. 1 STIFFENER CUSHION

   Click here

6. INSTALL COURTESY LIGHT ASSEMBLY

   Click here

7. INSTALL DOOR ARMREST COVER

   Click here

8. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Driver Side)

   Click here

9. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Front Passenger Side)

   Click here

10. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

11. PERFORM INITIALIZATION

    Click here

12. ADJUST SIDE TELEVISION CAMERA ASSEMBLY

    Click here