FRONT WIPER MOTOR ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT FRONT WIPER MOTOR AND LINK ASSEMBLY


    1. A01VWKGC01
      *a Alignment Mark

      for LH Side:


      1. Operate the windshield wiper motor assembly.

      2. Stop the windshield wiper motor assembly operation.

      3. Check the automatic stop (park) position.

        Tech Tips

        After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

        Standard Clearance
        Area Measurement
        A 7.5 mm (0.295 in.)
        OK
        The front wiper stops at the position shown in the illustration.
    2. A01VV0EC01
      *a Alignment Mark

      for RH Side:


      1. Operate the windshield wiper motor assembly.

      2. Stop the windshield wiper motor assembly operation.

      3. Check the automatic stop (park) position.

        Tech Tips

        After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

        Standard Clearance
        Area Measurement
        A 7.5 mm (0.295 in.)
        OK
        The front wiper stops at the position shown in the illustration.