POWER BACK DOOR DRIVE UNIT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE BACK WINDOW UPPER PANEL TRIM

    Click here

  2. REMOVE BACK DOOR TRIM COVER LH

    Click here

  3. REMOVE BACK DOOR TRIM COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE BACK DOOR LOCK COVER

    Click here

  5. REMOVE BACK DOOR TRIM BASE

    Click here

  6. REMOVE DOOR PULL HANDLE

    Click here

  7. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  8. REMOVE BACK DOOR TRIM PANEL ASSEMBLY

    Click here

  9. REMOVE POWER BACK DOOR UNIT SET ASSEMBLY


    1. B005L5NC02
      *a Grommet

      Disconnect the connector.

    2. Disengage the grommet.

    3. B005LVOC02
      *a Protective Tape
      B005OOA Remove in this Direction (1)
      B005OMH Remove in this Direction (2)

      Using a screwdriver with its tip wrapped with protective tape, slightly raise the 2 stop rings as indicated by the arrows, in the order shown in the illustration.

    4. Disengage the 2 ball joints to remove the power back door unit set assembly.

      Note


      • Remove the power back door unit set assembly while supporting the back door by hand.

      • Make sure to replace the power back door unit set assembly with a new one.

  10. REMOVE BACK DOOR DAMPER STAY UPPER BRACKET


    1. B005NWN

      Remove the 2 bolts and back door damper stay upper bracket.

  11. REMOVE BACK DOOR DAMPER STAY LOWER BRACKET


    1. B005PAQ

      Remove the 2 bolts and back door damper stay lower bracket.