POWER BACK DOOR TOUCH SENSOR INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL POWER BACK DOOR SENSOR ASSEMBLY

   
   

   1. Engage the clip.

   2. Install the power back door sensor assembly with the 4 screws.

      Torque:

      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

   3. Connect the connector.

2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY

   Click here

3. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

4. INSTALL DOOR PULL HANDLE

   Click here

5. INSTALL BACK DOOR TRIM BASE

   Click here

6. INSTALL BACK DOOR LOCK COVER

   Click here

7. INSTALL BACK DOOR TRIM COVER LH

   Click here

8. INSTALL BACK DOOR TRIM COVER RH

   Tech Tips

   Use the same procedure as for the LH side.

9. INSTALL BACK WINDOW UPPER PANEL TRIM

   Click here