POWER BACK DOOR TOUCH SENSOR INSPECTION

PROCEDURE


  1. INSPECT POWER BACK DOOR SENSOR ASSEMBLY LH


    1. A01R94TC06
      *a

      Component without harness connected

      (Power Back Door Sensor Assembly LH)
      *b Not Pressed
      *c Pressed

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Not pressed 950 to 1050 Ω
      1 - 2 Pressed Below 100 Ω

      If the result is not as specified, replace the power back door sensor assembly LH.

  2. INSPECT POWER BACK DOOR SENSOR ASSEMBLY RH


    1. A01R94TC07
      *a

      Component without harness connected

      (Power Back Door Sensor Assembly RH)
      *b Not Pressed
      *c Pressed

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Not pressed 950 to 1050 Ω
      1 - 2 Pressed Below 100 Ω

      If the result is not as specified, replace the power back door sensor RH.