REAR NO. 1 SEAT OUTER BELT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY


    1. B005M7FC01
      *a Retractor
      *b Unlock
      *c Lock
      *d 15° or more

      Before installing the rear No. 1 seat outer belt assembly, check the ELR function.

      Note

      Do not disassemble the retractor.


      1. When the inclination of the retractor is less than 15°, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 15°, check that the belt locks.

        If the result is not as specified, replace the rear No. 1 seat outer belt assembly.