REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type RH Side) INSTALLATION

PROCEDURE

1. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH

   
   

   1. Install the rear seat 3 point type belt assembly RH with the bolt.

      Torque:

      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

   2. w/ Seat Belt Warning System:

      
      

      1. Engage the 2 clamps.

      2. Connect the connector.

2. INSTALL REAR NO. 1 SEAT RECLINING ADJUSTER INSIDE COVER

   Click here

3. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD

   Click here

4. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH

   Click here

5. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH

   Click here

6. INSTALL REAR SEAT COVER CAP RH

   Click here

7. INSTALL REAR NO. 1 SEAT ASSEMBLY RH

   Click here