REAR SEAT INNER BELT ASSEMBLY(for RH Side) INSTALLATION

PROCEDURE

1. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH

   
   

   1. Install the rear seat 3 point type belt assembly RH with the bolt.

      Torque:

      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

   2. w/ Seat Belt Warning System:

      
      

      1. Connect the connector.

      2. Engage each clamp.

2. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD

   Click here

3. CONNECT SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD

   Click here

4. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH (for Manual Seat)

   Click here

5. INSTALL REAR SEAT COVER CAP RH (for Manual Seat)

   Click here

6. INSTALL POWER SEAT SWITCH ASSEMBLY (for Power Seat)

   Click here

7. INSTALL REAR SEAT ASSEMBLY RH

   Click here