REAR SEATBACK HEATER(for 60/40 Split Seat Type RH Side) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame may injure your hands.

PROCEDURE


  1. INSTALL REAR SEATBACK HEATER (SEPARATE TYPE REAR SEATBACK COVER) (w/o Rear No. 2 Seat)

    Tech Tips

    When installing a rear seatback heater (separate type rear seatback cover), refer to Precaution in order to prevent wrinkles from forming.

    Click here


    1. B005N84N01

      for Manual Seat:


      1. Using hog ring pliers, install the rear seatback heater (separate type rear seatback cover) to the separate type rear seatback pad with 11 new hog rings in the order shown in the illustration.

        Note


        • Be careful not to damage the rear seatback heater (separate type rear seatback cover).

        • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the rear seatback heater (separate type rear seatback cover).

    2. for Power Seat:


      1. B005N84N01

        Using hog ring pliers, install 11 new hog rings in the order shown in the illustration.

        Note


        • Be careful not to damage the rear seatback heater (separate type rear seatback cover).

        • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the rear seatback heater (separate type rear seatback cover).

      2. B005Q1S

        Using hog ring pliers, install the rear seatback heater (separate type rear seatback cover) to the separate type rear seatback pad with a new hog ring as shown in the illustration.

        Note


        • Be careful not to damage the rear seatback heater (separate type rear seatback cover).

        • Be sure to securely install the hog ring as shown in the illustration while preventing wrinkles from forming on the rear seatback heater (separate type rear seatback cover).

  2. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (w/o Rear No. 2 Seat)

    Click here

  3. INSTALL REAR SEAT SHOULDER BELT COVER (w/o Rear No. 2 Seat)

    Click here

  4. INSTALL SEAT BELT ANCHOR COVER CAP (w/o Rear No. 2 Seat)

    Click here

  5. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

  6. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY RH (w/o Rear No. 2 Seat)

    Click here

  7. INSTALL REAR SEATBACK COVER RH (w/o Rear No. 2 Seat)

    Click here

  8. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD (w/o Rear No. 2 Seat)

    Click here

  9. CONNECT SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD (w/o Rear No. 2 Seat)

    Click here

  10. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH (w/o Rear No. 2 Seat)

    for Manual Seat:

    Click here

  11. INSTALL REAR SEAT COVER CAP RH (w/o Rear No. 2 Seat)

    for Manual Seat:

    Click here

  12. INSTALL POWER SEAT SWITCH ASSEMBLY (w/o Rear No. 2 Seat)

    for Power Seat:

    Click here

  13. INSTALL REAR SEAT ASSEMBLY RH (w/o Rear No. 2 Seat)

    Click here

  14. INSTALL REAR SEATBACK HEATER (SEPARATE TYPE REAR SEATBACK COVER) (w/ Rear No. 2 Seat)

    Tech Tips

    When installing a rear seatback heater (separate type rear seatback cover), refer to Precaution in order to prevent wrinkles from forming.

    Click here


    1. B005N8CN01

      Using hog ring pliers, install 11 new hog rings in the order shown in the illustration.

      Note


      • Be careful not to damage the rear seatback heater (separate type rear seatback cover).

      • Be sure to securely install the hog ring as shown in the illustration while preventing wrinkles from forming on the rear seatback heater (separate type rear seatback cover).

    2. B005PLKN01

      Using hog ring pliers, install the rear seatback heater (separate type rear seatback cover) to the separate type rear seatback pad with 2 new hog rings in the order shown in the illustration.

      Note


      • Be careful not to damage the rear seatback heater (separate type rear seatback cover).

      • Be sure to securely install the hog ring as shown in the illustration while preventing wrinkles from forming on the rear seatback heater (separate type rear seatback cover).

  15. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (w/ Rear No. 2 Seat)

    Click here

  16. INSTALL REAR SEAT SHOULDER BELT COVER (w/ Rear No. 2 Seat)

    Click here

  17. INSTALL SEAT BELT ANCHOR COVER CAP (w/ Rear No. 2 Seat)

    Click here

  18. INSTALL RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY RH (w/ Rear No. 2 Seat)

    Click here

  19. INSTALL REAR SEAT UPPER RECLINING COVER RH (w/ Rear No. 2 Seat)

    Click here

  20. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY RH (w/ Rear No. 2 Seat)

    Click here

  21. INSTALL REAR SEATBACK COVER RH (w/ Rear No. 2 Seat)

    Click here

  22. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

  23. INSTALL REAR NO. 1 SEAT RECLINING ADJUSTER INSIDE COVER (w/ Rear No. 2 Seat)

    Click here

  24. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD (w/ Rear No. 2 Seat)

    Click here

  25. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH (w/ Rear No. 2 Seat)

    Click here

  26. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH (w/ Rear No. 2 Seat)

    Click here

  27. INSTALL REAR SEAT COVER CAP RH (w/ Rear No. 2 Seat)

    Click here

  28. INSTALL REAR NO. 1 SEAT ASSEMBLY RH (w/ Rear No. 2 Seat)

    Click here