SEAT HEATER SWITCH(for Rear Side) INSPECTION

PROCEDURE


  1. INSPECT REFRESHING SEAT SWITCH (for Rear Side) (w/o Rear No. 2 Seat)


    1. B005MHEC02
      *a

      Component without harness connected

      (Refreshing Seat Switch (for Rear Side))

      Apply battery voltage and check the operation of the switch according to the table below.

      OK
      Battery Connection Condition Specified Condition

      Battery positive (+) → Terminal 7

      Battery negative (-) → Terminal 9

      		 Always Illumination comes on

      If the result is not as specified, replace the refreshing seat switch (for rear side).

  2. INSPECT REAR SEAT HEATER SWITCH (w/ Rear No. 2 Seat)


    1. B005MHEC02
      *a

      Component without harness connected

      (Rear Seat Heater Switch)

      Apply battery voltage and check the operation of the switch according to the table below.

      OK
      Battery Connection Condition Specified Condition

      Battery positive (+) → Terminal 7

      Battery negative (-) → Terminal 9

      		 Always Illumination comes on

      If the result is not as specified, replace the rear seat heater switch.