SEAT VARIABLE CUSHION SWITCH INSPECTION

PROCEDURE


  1. INSPECT SEAT VARIABLE CUSHION SWITCH (DRIVER SEAT)


    1. A01RCXPC01
      *A for LHD
      *B for RHD
      *a Front Switch
      *b Rear Switch
      *c

      Component without harness connected

      (Seat Variable Cushion Switch (Driver Seat))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for LHD
      Tester Connection Condition Specified Condition
      2 - 5 Front switch pressed Below 1 Ω
      3 - 4
      1 - 5 Off Below 1 Ω
      3 - 4
      1 - 5 Rear switch pressed Below 1 Ω
      2 - 3
      for RHD
      Tester Connection Condition Specified Condition
      1 - 5 Front switch pressed Below 1 Ω
      2 - 3
      1 - 5 Off Below 1 Ω
      3 - 4
      2 - 5 Rear switch pressed Below 1 Ω
      3 - 4

      If the result is not as specified, replace the seat variable cushion switch (driver seat).

  2. INSPECT SEAT VARIABLE CUSHION SWITCH (FRONT PASSENGER SEAT)


    1. A01RCXPC01
      *A for RHD
      *B for LHD
      *a Front Switch
      *b Rear Switch
      *c

      Component without harness connected

      (Seat Variable Cushion Switch (Front Passenger Seat))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for LHD
      Tester Connection Condition Specified Condition
      1 - 5 Front switch pressed Below 1 Ω
      2 - 3
      1 - 5 Off Below 1 Ω
      3 - 4
      2 - 5 Rear switch pressed Below 1 Ω
      3 - 4
      for RHD
      Tester Connection Condition Specified Condition
      2 - 5 Front switch pressed Below 1 Ω
      3 - 4
      1 - 5 Off Below 1 Ω
      3 - 4
      1 - 5 Rear switch pressed Below 1 Ω
      2 - 3

      If the result is not as specified, replace the seat variable cushion switch (front passenger seat).