REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type RH Side) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame may injure your hands.

PROCEDURE


  1. REMOVE SEAT ADJUSTER COVER CAP


    1. B005N8A

      Remove the 2 seat adjuster cover caps.

  2. REMOVE REAR SEAT COVER CAP RH


    1. B005M28C02
      *a Protective Tape
      B005M6U Insert Screwdriver Here
      B005OOA Remove in this Direction

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and 2 guides to remove the rear seat cover cap RH as shown in the illustration.

  3. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH


    1. B005LYP

      Remove the 3 screws and No. 1 reclining adjuster release handle RH.

  4. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH


    1. B005PNW

      Disengage the 3 hooks.

    2. B005Q6M

      Disengage the clamp to disconnect the rear seat reclining control cable.

    3. B005ONQ

      Remove the 2 screws.

    4. B005OWCC03
      B005OOA Remove in this Direction

      Disengage the guide as shown in the illustration.

    5. B005P4S

      Disconnect the rear seat reclining control cable to remove the rear seat lock control lever sub-assembly RH.

  5. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD


    1. B005ME5C02
      *a Rubber Band
      B005OOA Remove in this Direction

      Remove the rear center seat inner belt assembly from the rubber band of the separate type rear seat cushion cover as shown in the illustration.

    2. B005NUP

      Disengage the 4 hooks.

    3. B005O1A

      Disengage the 8 hooks.

    4. w/ Seat Heater System:


      1. B005PSM

        Disconnect the 2 connectors.

      2. Disengage the 3 clamps.

    5. B005M54

      Disengage the 2 clamps.

    6. B005Q5D

      Disengage the hook.

    7. B005NRM

      Disengage the 6 hooks.

    8. B005O5Y

      Disengage the 11 hooks and remove the separate type rear seat cushion cover with pad.

  6. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER


    1. B005Q1U

      Remove the 10 hog rings.

    2. B005N4P

      Remove the 20 hog rings and separate type rear seat cushion cover from the rear seat cushion pad RH.

  7. REMOVE SEAT COVER WIRE


    1. B005OYK

      Remove the 6 seat cover wires.

  8. REMOVE REAR SEAT CUSHION EDGE PROTECTOR


    1. B005OI4

      Remove the rear seat cushion edge protector.

  9. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY RH (w/ Seat Heater System)


    1. B005NMB

      Disconnect the connector.

    2. Disengage the 2 clamps to remove the seat heater control sub-assembly RH.

  10. REMOVE CENTER SEAT HINGE COVER LH


    1. B005LWDC02
      B005OOA Remove in this Direction

      Disengage the clip, 5 claws and guide to remove the center seat hinge cover LH as shown in the illustration.

  11. REMOVE REAR CENTER SEAT INNER BELT ASSEMBLY

    Click here

  12. REMOVE REAR NO. 1 SEAT RECLINING ADJUSTER INSIDE COVER


    1. B005PYJC02
      B005OOA Remove in this Direction

      Disengage the clip and 3 claws to remove the rear No. 1 seat reclining adjuster inside cover as shown in the illustration.

  13. REMOVE REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH

    Click here

  14. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

    Click here

  15. REMOVE REAR SEATBACK COVER (w/ Cover)


    1. B005LTJ

      Disengage the 2 claws as shown in the illustration.

    2. B005N1NC02
      B005OOA Remove in this Direction

      Disengage the 6 claws to remove the rear seatback cover as shown in the illustration.

  16. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY


    1. B005Q21C03
      B005M6U Place Hand Here
      B005OOA Remove in this Direction

      Disengage the 10 claws and 5 clips to remove the rear seatback board sub-assembly as shown in the illustration.

  17. REMOVE REAR CENTER SEAT CUSHION COVER SUB-ASSEMBLY


    1. B005PX0

      Disengage the 2 guides to disconnect the rubber band and remove the rear center seat cushion cover sub-assembly.

  18. REMOVE CENTER ARMREST HINGE COVER LH


    1. B005M49C02
      B005M6U Place Hand Here
      B005OOA Remove in this Direction

      Disengage the 7 claws and 6 guides to remove the center armrest hinge cover LH as shown in the illustration.

  19. REMOVE NO. 1 SEAT ARMREST ASSEMBLY


    1. B005OHX

      Disconnect the connector.

    2. Disengage the clamp.

    3. B005QG2

      Remove the 2 bolts.

    4. B005MA7

      Using a clip remover, disengage the 2 clips to remove the No. 1 seat armrest assembly.

  20. REMOVE ARMREST ASSEMBLY


    1. B005N73

      Using a T30 "TORX" socket wrench, remove the bolt.

    2. Remove the 2 nuts and rear seatback center hinge sub-assembly.

    3. B005P8M

      Using a T45 "TORX" socket wrench, remove the 2 bolts and 2 No. 2 rear seat reclining spacers.

    4. B005Q58C01
      *a Pin

      Engage the rear seatback hinge to the pin of the center armrest hinge cover RH as shown in the illustration.

      Note

      If the rear seatback hinge is not engaged to the pin of the center armrest hinge cover RH, the armrest assembly cannot be removed as it will interfere with the rear seatback frame sub-assembly RH.

    5. Disengage the pin and remove the armrest assembly as shown in the illustration.

      B005OLCC01
      B005OOA Remove in this Direction (1) B005OMH Remove in this Direction (2)
    6. B005NN2C01
      *a Pin

      Disengage the rear seatback hinge from the pin of the center armrest hinge cover RH as shown in the illustration.

  21. REMOVE CENTER ARMREST HINGE COVER RH


    1. B005MVLC01
      B005M6U Place Hand Here
      B005OOA Remove in this Direction

      Disengage the 7 claws and 6 guides to remove the center armrest hinge cover RH as shown in the illustration.

  22. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY


    1. B005LV2

      Using a T30 "TORX" socket wrench, remove the bolt and rear seatback hinge.

    2. B005O7IC01
      B005OOA Remove in this Direction

      Remove the rear No. 1 seat center armrest plate as shown in the illustration.

    3. B005Q27

      Using a clip remover, disengage the 2 clips to remove the rear seat center armrest cover sub-assembly.

    4. B005NVNC01
      *a Hook
      *b Clamp

      Disengage the 2 hooks and clamp.

    5. Lower the rear seat center armrest assembly as shown in the illustration.

      B005M2C
    6. B005QDO

      Using a clip remover, disengage the 3 clips.

    7. B005N2M

      Using a T45 "TORX" socket wrench, remove the 2 bolts and 2 No. 1 rear seat reclining spacers.

    8. Disengage the guide and remove the rear seat center armrest assembly as shown in the illustration.

      B005P0MC01
      B005OOA Remove in this Direction (1) B005OMH Remove in this Direction (2)

  23. REMOVE REAR SEAT CENTER ARMREST COVER


    1. B005MGO

      Remove the 2 rear seat center armrest covers.

  24. REMOVE CUP HOLDER ASSEMBLY


    1. B005L8M

      Remove the 2 screws and cup holder assembly.

  25. REMOVE REAR SEAT CENTER ARMREST DOOR SUB-ASSEMBLY


    1. B005QA2

      Remove the 2 screws and rear seat center armrest door sub-assembly.

  26. REMOVE CENTER ARMREST LOCK SUB-ASSEMBLY


    1. B005NK5

      Remove the 4 screws.

    2. Disengage the 2 claws and remove the rear seat center armrest plate.

    3. B005NN5

      Remove the 4 screws and center armrest lock sub-assembly.

  27. REMOVE NO. 2 REAR SEAT CENTER ARMREST BOX


    1. B005O4B

      Remove the 5 screws.

    2. Disengage the clamp and remove the No. 2 rear seat center armrest box.

  28. REMOVE REAR CONSOLE BOX WIRE


    1. B005O5TC01
      *A w/ Rear Seat Entertainment System
      *B w/ Seat Heater System
      *C w/ Rear Seat Entertainment System or Seat Heater System

      Disconnect each connector.

    2. w/ Rear Seat Entertainment System or Seat Heater System:


      1. Disengage each clamp.

    3. Remove the rear console box wire.

  29. REMOVE REAR SEAT HEATER SWITCH (w/ Seat Heater System)


    1. B005OMU

      Remove the 3 screws and rear seat heater switch.

  30. REMOVE HEADPHONE TERMINAL LH (w/ Rear Seat Entertainment System)

    Click here

  31. REMOVE HEADPHONE TERMINAL RH (w/ Rear Seat Entertainment System)

    Tech Tips

    Use the same procedure as for the LH side.

  32. REMOVE NO. 1 SEATBACK COVER


    1. B005P2OC02
      B005OOA Remove in this Direction

      Disengage the 4 claws and remove the 2 rear seat headrest support assemblies as shown in the illustration.

    2. B005OEL

      Disengage the 3 clips and 3 claws to remove the No. 1 seatback cover.

  33. REMOVE REAR SEATBACK LOCK LEVER


    1. B005PN4

      Disengage the retainer as shown in the illustration and separate the fold seatback wire.

    2. B005QDWC01
      B005OOA Remove in this Direction

      Remove the fold seatback wire as shown in the illustration.

    3. Disengage the guide and claw to remove the rear seatback lock lever as shown in the illustration.

      B005PZ0C02
      B005OOA Remove in this Direction (1) B005OMH Remove in this Direction (2)

  34. REMOVE NO. 2 CENTER SEATBACK COVER


    1. B005MQH

      Remove the 3 screws and No. 2 center seatback cover.

  35. REMOVE REAR SEATBACK LOCK ASSEMBLY RH


    1. B005N69

      Remove the 2 bolts and rear seatback lock assembly RH.

  36. REMOVE REAR SEATBACK COVER RH


    1. B005MPP

      Disengage the 2 claws as shown in the illustration.

    2. B005Q7FC02
      B005OOA Remove in this Direction

      Disengage the 6 claws to remove the rear seatback cover RH as shown in the illustration.

  37. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH


    1. B005PYO

      Disengage the 6 clips and 4 guides as shown in the illustration.

    2. B005MPIC02
      B005OOA Remove in this Direction

      Disengage the 3 guides to remove the rear seatback board carpet assembly RH as shown in the illustration.

  38. REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY RH


    1. B005QEE

      Disengage the 2 guides to disconnect the rubber band and remove the No. 2 seat cushion cover sub-assembly RH.

  39. REMOVE REAR SEAT UPPER RECLINING COVER RH


    1. B005OQMC02
      B005OOAC56 Remove in this Direction

      Disengage the claw and 2 guides to remove the rear seat upper reclining cover RH as shown in the illustration.

  40. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY RH


    1. B005MTQ

      Remove the 2 screws.

    2. B005P7UC02
      B005OOA Remove in this Direction

      Disengage the guide as shown in the illustration.

    3. B005LX2

      Disconnect the reclining adjusting cable assembly to remove the reclining remote control lever sub-assembly RH.

  41. REMOVE SEAT BELT ANCHOR COVER CAP


    1. B005L4OC02
      B005OOA Remove in this Direction

      Disengage the 2 guides to remove the seat belt anchor cap as shown in the illustration.

  42. REMOVE REAR SEAT SHOULDER BELT COVER


    1. B005NO6

      Disengage the 2 claws and 2 guides and pass the rear center seat outer belt assembly through the rear seat shoulder belt cover to remove the rear seat shoulder belt cover.

  43. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD


    1. B005MU3

      Disengage the 12 hooks.

    2. B005P7YC02
      B005M97 Fastener

      Disengage the fastener and hook.

    3. B005LZNC02
      B005OOA Remove in this Direction

      Disengage the 4 claws and remove the 2 rear No. 1 seat headrest support assemblies as shown in the illustration.

    4. B005OBL

      Remove the nut and disconnect the 2 rear seatback cover brackets.

    5. Remove the separate type rear seatback cover with pad.

  44. REMOVE SEPARATE TYPE REAR SEATBACK COVER


    1. B005N13

      Remove the 2 hog rings.

    2. B005MJ8

      Remove the 11 hog rings and separate type rear seatback cover from the separate type rear seatback pad.

  45. REMOVE RECLINING REMOTE CONTROL BEZEL RH


    1. B005NP1

      Remove the reclining remote control bezel RH.

  46. REMOVE SEAT COVER WIRE


    1. B005PQC

      Remove the 5 seat cover wires.

  47. REMOVE REAR SEAT AIRBAG ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  48. REMOVE REAR SEATBACK EDGE PROTECTOR


    1. B005PD9

      Remove the rear seatback edge protector.

  49. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY

    Click here

  50. REMOVE REAR SEAT CUSHION SPRING DAMPER RH


    1. B005LL9

      Remove the 2 nuts.

    2. Disengage the guide to remove the rear seat cushion spring damper RH.

  51. REMOVE CENTER SEAT HINGE COVER RH


    1. B005OJ1C02
      B005OOA Remove in this Direction

      Disengage the 5 claws to remove the center seat hinge cover RH as shown in the illustration.

  52. REMOVE NO. 1 RECLINING LINK COVER RH


    1. B005LWUC02
      B005OOA Remove in this Direction

      Disengage the 5 claws and guide to remove the No. 1 reclining link cover RH as shown in the illustration.

  53. REMOVE NO. 2 RECLINING LINK COVER RH


    1. B005MHFC03
      B005OOA Remove in this Direction

      Disengage the guide to remove the No. 2 reclining link cover RH as shown in the illustration.

  54. REMOVE REAR NO. 1 SEAT RECLINING COVER RH


    1. B005PHWC02
      B005OOA Remove in this Direction (1)
      B005OMH Remove in this Direction (2)

      Disengage the 10 claws and 7 guides as indicated by the arrows, in the order shown in the illustration to remove the rear No. 1 seat reclining cover RH.

  55. REMOVE REAR NO. 1 SEAT RECLINING ADJUSTER INSIDE COVER


    1. B005O16C02
      B005OOA Remove in this Direction (1)
      B005OMH Remove in this Direction (2)

      Disengage the 3 claws and 2 guides as indicated by the arrows, in the order shown in the illustration to remove the rear No. 1 seat reclining adjuster inside cover.

  56. REMOVE REAR NO. 1 SEAT RECLINING ADJUSTER INSIDE COVER


    1. B005PTAC02
      B005OOA Remove in this Direction

      Disengage the 2 claws, clip and guide to remove the rear No. 1 seat reclining adjuster inside cover as shown in the illustration.

  57. REMOVE REAR SEAT INNER RECLINING COVER RH


    1. B005P64C02
      B005OOA Remove in this Direction (1)
      B005OMH Remove in this Direction (2)

      Disengage the 9 claws and 9 guides as indicated by the arrows, in the order shown in the illustration to remove the rear seat inner reclining cover RH.

  58. REMOVE REAR NO. 1 SEAT RECLINING ADJUSTER INSIDE COVER


    1. B005Q6VC02
      B005OOA Remove in this Direction

      Disengage the 3 claws and 2 guides to remove the rear No. 1 seat reclining adjuster inside cover as shown in the illustration.

  59. REMOVE REAR NO. 1 SEAT RECLINING ADJUSTER INSIDE COVER


    1. B005Q75C02
      B005OOA Remove in this Direction

      Disengage the guide to remove the rear No. 1 seat reclining adjuster inside cover as shown in the illustration.

  60. REMOVE RH SEAT REAR SEAT RECLINING COVER


    1. B005POSC02
      B005OOA Remove in this Direction

      Disengage the 5 claws and guide to remove the RH seat rear seat reclining cover as shown in the illustration.

  61. REMOVE RH SEAT REAR SEAT RECLINING COVER


    1. B005OG1C02
      B005OOA Remove in this Direction (1)
      B005OMH Remove in this Direction (2)

      Disengage the guide and remove the RH seat rear seat reclining cover as shown in the illustration.

  62. REMOVE REAR SEAT WIRE RH


    1. w/o Seat Belt Warning System:


      1. B005OCT

        Disengage the 2 claws and 7 clamps and remove the rear seat wire RH.

    2. w/ Seat Belt Warning System:


      1. B005N8G

        Disengage the 2 claws and 9 clamps and remove the rear seat wire RH.

  63. REMOVE RECLINING ADJUSTING CABLE ASSEMBLY


    1. Disengage the 6 clamps.

      B005MJ3

    2. Disengage the 2 clamps and remove the reclining adjusting cable assembly.

      B005NQV

  64. REMOVE REAR NO. 1 SEAT TRACK CONTROL CABLE ASSEMBLY RH


    1. Disengage the 6 clamps.

      B005PXG

    2. Disengage the clamp and remove the rear No. 1 seat track control cable assembly RH.

      B005NFX

  65. REMOVE REAR SEAT RECLINING CONTROL CABLE


    1. Disengage the 8 clamps.

      B005LTH

    2. Disengage the clip and clamp, and remove the rear seat reclining control cable.

      B005N5O

  66. REMOVE RECLINING CONTROL LINK SUB-ASSEMBLY RH


    1. B005PL1

      Remove the 2 nuts and reclining control link sub-assembly RH.

  67. REMOVE RECLINING CONTROL LINK SUB-ASSEMBLY RH


    1. B005O40

      Remove the 2 nuts and reclining control link sub-assembly RH.

  68. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY RH


    1. Using a T55 "TORX" socket wrench, remove the 2 bolts (A).

      B005OVIC02
      B005NIZ Bolt (A) B005LWS Bolt (B)
      B005OOA Remove in this Direction - -

    2. Using a T40 "TORX" socket wrench, remove the 4 bolts (B).

    3. Remove the rear seatback frame sub-assembly RH from the No. 1 seat cushion frame sub-assembly RH as shown in the illustration.