CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the seat frame may injure your hands.
PROCEDURE
REMOVE SEAT ADJUSTER COVER CAP
Remove the 2 seat adjuster cover caps.
REMOVE REAR SEAT COVER CAP LH
| *a | Protective Tape |
|
Insert Screwdriver Here |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and 2 guides to remove the rear seat cover cap LH as shown in the illustration.
REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH
Remove the 3 screws and No. 1 reclining adjuster release handle LH.
REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH
Disengage the 3 hooks.
Disengage the clamp to disconnect the rear seat reclining control cable.
Disengage the hook.
Remove the 2 screws.
|
Remove in this Direction |
Disengage the guide as shown in the illustration.
Disconnect the rear seat reclining control cable to remove the rear seat lock control lever sub-assembly LH.
REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD
Disengage the 4 hooks.
w/ Seat Heater System:
Disconnect the 2 connectors.
Disengage the 3 clamps.
Disengage the 2 clamps.
Disengage the hook.
Disengage the 9 hooks and remove the separate type rear seat cushion cover with pad.
REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER
|
Fastener |
Disengage the fastener.
Remove the 6 hog rings.
Remove the 20 hog rings and separate type rear seat cushion cover from the rear seat cushion pad LH.
REMOVE SEAT COVER WIRE
Remove the 6 seat cover wires.
REMOVE REAR SEAT CUSHION EDGE PROTECTOR
Remove the rear seat cushion edge protector.
REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY LH (w/ Seat Heater System)
Disconnect the connector.
Disengage the 2 clamps to remove the seat heater control sub-assembly LH.
REMOVE REAR NO. 1 SEAT RECLINING ADJUSTER INSIDE COVER
|
Remove in this Direction |
Disengage the clip and 3 claws to remove the rear No. 1 seat reclining adjuster inside cover as shown in the illustration.
REMOVE REAR SEAT INNER BELT ASSEMBLY LH
REMOVE REAR SEATBACK COVER LH
Disengage the 2 claws as shown in the illustration.
|
Remove in this Direction |
Disengage the 6 claws and remove the rear seatback cover LH as shown in the illustration.
REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH
Disengage the 6 clips and 4 guides as shown in the illustration.
|
Remove in this Direction |
Disengage the 3 guides to remove the rear seatback board carpet assembly LH as shown in the illustration.
REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH
Disengage the 2 guides to disconnect the rubber band and remove the No. 2 seat cushion cover sub-assembly LH.
REMOVE REAR SEAT UPPER RECLINING COVER LH
|
Remove in this Direction |
Disengage the claw and 2 guides to remove the rear seat upper reclining cover LH as shown in the illustration.
REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY LH
Remove the 2 screws.
|
Remove in this Direction |
Disengage the guide as shown in the illustration.
Disconnect the reclining adjusting cable assembly to remove the reclining remote control lever sub-assembly LH.
REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD
Disengage the 12 hooks.
|
Remove in this Direction |
Disengage the 4 claws and remove the 2 rear No. 1 seat headrest support assemblies as shown in the illustration.
Remove the nut and disconnect the 2 rear seatback cover brackets.
Remove the separate type rear seatback cover with pad.
REMOVE SEPARATE TYPE REAR SEATBACK COVER
|
Fastener |
Disengage the 2 fasteners.
Remove the 2 hog rings.
Remove the 11 hog rings and separate type rear seatback cover from the separate type rear seatback pad.
REMOVE RECLINING REMOTE CONTROL BEZEL LH
Remove the reclining remote control bezel LH.
REMOVE SEAT COVER WIRE
Remove the 5 seat cover wires.
REMOVE REAR SEAT AIRBAG ASSEMBLY LH
REMOVE REAR SEATBACK EDGE PROTECTOR
Remove the rear seatback edge protector.
REMOVE NO. 1 RECLINING LINK COVER LH
|
Remove in this Direction |
Disengage the 5 claws and guide to remove the No. 1 reclining link cover LH as shown in the illustration.
REMOVE NO. 2 RECLINING LINK COVER LH
|
Remove in this Direction |
Disengage the guide to remove the No. 2 reclining link cover LH as shown in the illustration.
REMOVE REAR NO. 1 SEAT RECLINING COVER LH
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disengage the 11 claws and 6 guides as indicated by the arrows, in the order shown in the illustration to remove the rear No. 1 seat reclining cover LH.
REMOVE REAR NO. 1 SEAT RECLINING ADJUSTER INSIDE COVER
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disengage the 2 claws and guide as indicated by the arrows, in the order shown in the illustration to remove the rear No. 1 seat reclining adjuster inside cover.
REMOVE REAR NO. 1 SEAT RECLINING ADJUSTER INSIDE COVER
|
Remove in this Direction |
Disengage the 2 claws, clip and guide to remove the rear No. 1 seat reclining adjuster inside cover as shown in the illustration.
REMOVE REAR NO. 1 SEAT RECLINING ADJUSTER INSIDE COVER
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disengage the 6 claws and 2 guides as indicated by the arrows, in the order shown in the illustration to remove the rear No. 1 seat reclining adjuster inside cover.
REMOVE REAR NO. 1 SEAT RECLINING ADJUSTER INSIDE COVER
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disengage the 2 claws and guide as indicated by the arrows, in the order shown in the illustration to remove the rear No. 1 seat reclining adjuster inside cover.
REMOVE REAR SEAT INNER RECLINING COVER LH
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disengage the clip, claw and 2 guides as indicated by the arrows, in the order shown in the illustration to remove the rear seat inner reclining cover LH.
REMOVE LH SEAT REAR SEAT RECLINING COVER
|
Remove in this Direction |
Disengage the 5 claws and guide to remove the LH seat rear seat reclining cover as shown in the illustration.
REMOVE LH SEAT REAR SEAT RECLINING COVER
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disengage the guide and remove the LH seat rear seat reclining cover as shown in the illustration.
REMOVE REAR SEAT WIRE LH
w/o Seat Belt Warning System:
Disengage the 2 claws and 4 clamps, and remove the rear seat wire LH.
w/ Seat Belt Warning System:
Disengage the 2 claws and 5 clamps, and remove the rear seat wire LH.
REMOVE RECLINING ADJUSTING CABLE ASSEMBLY
Disengage the 6 clamps.
Disengage the 2 clamps and remove the reclining adjusting cable assembly.
REMOVE REAR NO. 1 SEAT TRACK CONTROL CABLE ASSEMBLY LH
Disengage the 6 clamps.
Disengage the clamp and remove the rear No. 1 seat track control cable assembly LH.
REMOVE REAR SEAT RECLINING CONTROL CABLE
Disengage the 8 clamps.
Disengage the clip and clamp, and remove the rear seat reclining control cable.
REMOVE RECLINING CONTROL LINK SUB-ASSEMBLY LH
Remove the 2 nuts and reclining control link sub-assembly LH.
REMOVE RECLINING CONTROL LINK SUB-ASSEMBLY LH
Remove the 2 nuts and reclining control link sub-assembly LH.
REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY LH
|
Remove in this Direction |
Using a T40 "TORX" socket wrench, remove the 6 bolts.
Remove the rear seatback frame sub-assembly LH from the No. 1 seat cushion frame sub-assembly LH as shown in the illustration.