PRE-CRASH SAFETY SYSTEM WARNING BUZZER INSTALLATION

PROCEDURE

1. INSTALL SKID CONTROL BUZZER ASSEMBLY (for LHD)

   
   

   1. 

      Connect the connector.

      Tech Tips

      Make sure to install the skid control buzzer assembly in the correct direction.

   2. Engage the clamp to install the skid control buzzer assembly.

      Note

      If the skid control buzzer assembly has been struck or dropped, replace it with a new one.

2. INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY WITH MAIN BODY ECU (for LHD)

   Click here

3. INSTALL SKID CONTROL BUZZER ASSEMBLY (for RHD)

   
   

   1. 

      Connect the connector.

      Tech Tips

      Make sure to install the skid control buzzer assembly in the correct direction.

   2. Engage the clamp to install the skid control buzzer assembly.

      Note

      If the skid control buzzer assembly has been struck or dropped, replace it with a new one.

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

   Tech Tips

   Use the same procedure as for LHD.

   Click here