REAR SEAT SIDE AIRBAG ASSEMBLY(w/o Rear No. 2 Seat) ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Be sure to correctly follow the removal and installation procedures for the rear seat airbag assemblies.

PROCEDURE


  1. INSPECT REAR SEAT AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)


    1. Perform a diagnostic system check.

      Click here

    2. Visually check for defects with the rear seat airbag assemblies installed to the vehicle.

      Tech Tips

      The defects are as follows:


      • Scratches, broken or frayed threads on the surface of the rear seatback assembly around the rear seat airbag assemblies

      • Small cracks in the rear seatback assembly around the rear seat airbag assemblies

      • Significant discoloration on the rear seatback assembly around the rear seat airbag assemblies

      OK
      No defects are found.

      If any defects are found, replace the separate type rear seatback pad or separate type rear seatback cover with a new one.

  2. INSPECT REAR SEAT AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)


    1. Perform a diagnostic system check.

      Click here

    2. Visually check for defects with the rear seat airbag assemblies removed from the vehicle.

      Tech Tips

      The defects are as follows:


      • Scratches, broken or frayed threads on the surface of the base fabric of the rear seat airbag assemblies

      • Marks from being dropped

      • Deformation of the installation surface of the rear seat airbag assemblies

      • Cracks or other damage to the wire harness or connector

      OK
      No defects are found.

      If any defects are found, replace the rear seat airbag assembly with a new one.