DOOR COURTESY LIGHT BULB REPLACEMENT

PROCEDURE


  1. REMOVE COURTESY LIGHT ASSEMBLY (for Front Door)


    1. A01RCGXC01
      *A for LH Side
      *B for RH Side
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw.

    2. Disconnect the connector to remove the courtesy light assembly.

  2. REMOVE COURTESY LIGHT ASSEMBLY (for Rear Door)


    1. A01R9SOC01
      *A for LH Side
      *B for RH Side
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw.

    2. Disconnect the connector to remove the courtesy light assembly.

  3. REMOVE COURTESY LIGHT BULB


    1. A01R90AC01
      *a Protective Tape
      B005OOA Remove in this Direction

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the courtesy light housing with the courtesy light cover as shown in the illustration.

    2. A01R979C01
      B005OOA Remove in this Direction

      Remove the courtesy light cover from the courtesy light housing as shown in the illustration.

    3. A01RFD5C01
      B005OOA Remove in this Direction

      Remove the courtesy light bulb from the courtesy light housing as shown in the illustration.

  4. INSTALL COURTESY LIGHT BULB


    1. A01RAPXC01
      B005OOA Install in this Direction

      Install the courtesy light bulb to the courtesy light housing as shown in the illustration.

    2. A01R8ZCC01
      B005OOA Install in this Direction

      Install the courtesy light cover to the courtesy light housing as shown in the illustration.

    3. A01RFRQC01
      B005OOA Install in this Direction

      Engage the claw to install the courtesy light housing with the courtesy light cover as shown in the illustration.

  5. INSTALL COURTESY LIGHT ASSEMBLY (for Front Door)


    1. Connect the connector.

    2. A01RCM6C01
      *A for LH Side
      *B for RH Side

      Engage the claw to install the courtesy light assembly.

  6. INSTALL COURTESY LIGHT ASSEMBLY (for Rear Door)


    1. Connect the connector.

    2. A01RESKC01
      *A for LH Side
      *B for RH Side

      Engage the claw to install the courtesy light assembly.