DOOR COURTESY LIGHT INSPECTION

PROCEDURE


  1. INSPECT COURTESY LIGHT ASSEMBLY (Bulb Type)


    1. A01RCLJC17
      *a

      Component without harness connected

      (Courtesy Light Assembly)

      Apply battery voltage to the connector and check that the courtesy light comes on.

      OK
      Measurement Condition Condition Specified Condition

      Battery positive (+) → 1

      Battery negative (-) → 2

      		 Always Courtesy light comes on

      If the result is not as specified, replace the bulb or courtesy light assembly.

  2. INSPECT COURTESY LIGHT ASSEMBLY (LED Type)


    1. A01RFLWC01
      *a

      Component without harness connected

      (Courtesy Light Assembly)

      Apply battery voltage to the connector and check that the courtesy light comes on.

      OK
      Measurement Condition Condition Specified Condition

      Battery positive (+) → 1

      Battery negative (-) → 2

      		 Always Courtesy light comes on

      If the result is not as specified, replace the courtesy light assembly.