VANITY LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE VANITY LIGHT ASSEMBLY


    1. A01RDNS

      Using a moulding remover, disengage the claw.

    2. A01RFS4

      Disengage the 2 claws to remove the vanity light assembly from the bulb holder.

  2. REMOVE VANITY LIGHT BULB


    1. A01RF71C01
      B005OOA Remove in this Direction

      Remove the vanity light bulb from the bulb holder as shown in the illustration.