GLOVE BOX LIGHT INSPECTION

PROCEDURE


  1. INSPECT GLOVE BOX LIGHT ASSEMBLY


    1. A01R9BXC02
      *a

      Component without harness connected

      (Glove Box Light Assembly)

      Inspect the glove box light.


      1. Apply battery voltage to each terminal of glove box light assembly connector and check the operation of the glove box light.

        Result
        Connection Specified Condition

        Battery positive (+) → 2

        Battery negative (-) → 1

        		 Glove box light comes on

        If the result is not as specified, replace the glove box light assembly.