INSTRUMENT PANEL BOX LIGHT INSPECTION

PROCEDURE


  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY


    1. A01R9BXC02
      *a

      Component without harness connected

      (No. 1 interior Illumination Light Assembly)

      Inspect the No. 1 interior illumination light.


      1. Apply battery voltage to each terminal of No. 1 interior illumination light connector and check the operation of the No. 1 interior illumination light.

        Result
        Connection Specified Condition

        Battery positive (+) → 2

        Battery negative (-) → 1

        		 No. 1 interior illumination light comes on

        If the result is not as specified, replace the No. 1 interior illumination light assembly.