BACK DOOR WEATHERSTRIP INSTALLATION

PROCEDURE

1. INSTALL BACK DOOR WEATHERSTRIP

   
   

   1. Clean the vehicle body.

   2. Align the joint of a new back door weatherstrip with the back door lock striker and temporarily install the back door weatherstrip.

      

      *a	Alignment mark (White)	*b	Alignment mark (Pink)
      *c	Joint	-	-
      	Flange Position	-	-

   3. Align the alignment marks on the back door weatherstrip with the flanges on the vehicle body indicated by the arrows, and install the back door weatherstrip.

      Note

      After installation, check that the corners fit correctly.