BACK DOOR DISASSEMBLY

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during back door disassembly/reassembly are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Rear television camera assembly Rear television camera assembly optical axis (Back camera position setting) Parking assist monitor system (w/ Parallel parking assist function)

Click here for Initialization

Click here for Calibration

  • Parking assist monitor system initialization

  • Rear television camera assembly optical axis (Back camera position setting)

 Parking assist monitor system (w/o Parallel parking assist function)

Click here for Initialization

Click here for Calibration
Rear television camera view adjustment Panoramic view monitor system

Click here for Initialization

Click here for Calibration
Multiplex network door ECU Reset Back Door Close Position Power back door system

Click here

PROCEDURE


  1. REMOVE BACK WINDOW UPPER PANEL TRIM


    1. B005MP7C02
      B005M6U Place Hand Here
      B005NIZ Order of Removal

      Disengage the 4 claws, 5 clips and 4 guides to remove the back window upper trim panel as shown in the illustration.

  2. REMOVE BACK DOOR TRIM COVER LH


    1. B005OBAC02
      B005M6U Place Hand Here
      B005OOA Remove in this Direction

      Disengage the 2 clips, 2 claws and 2 guides to remove the back door trim cover LH as shown in the illustration.

  3. REMOVE BACK DOOR TRIM COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE BACK DOOR LOCK COVER


    1. B005PERC02
      B005M6U Place Hand Here

      Disengage the 4 claws to remove the back door lock cover.

  5. REMOVE BACK DOOR FINISH COVER LH (w/o Power Back Door)


    1. B005LK1

      Using a moulding remover, disengage the 4 claws to remove the back door finish cover LH.

  6. REMOVE BACK DOOR FINISH COVER RH (w/o Power Back Door)

    Tech Tips

    Use the same procedure as for the LH side.

  7. REMOVE BACK DOOR TRIM BASE (w/ Power Back Door)


    1. B005P1F

      Using a moulding remover, disengage the 4 claws to remove the back door trim base.

  8. REMOVE DOOR PULL HANDLE (w/ Power Back Door)


    1. B005NHG

      Using a moulding remover, disengage the 6 claws.

    2. Disconnect the connector to remove the door pull handle.

  9. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  10. REMOVE BACK DOOR TRIM PANEL ASSEMBLY


    1. B005NK9C02
      B005OOA Remove in this Direction

      Disengage the 16 clips to remove the back door trim panel assembly as shown in the illustration.

  11. REMOVE BACK DOOR LOCK ASSEMBLY (w/o Power Back Door)

    Click here

  12. REMOVE BACK DOOR LOCK ASSEMBLY (w/ Power Back Door)

    Click here

  13. REMOVE BACK DOOR LOWER STAY REINFORCEMENT LH


    1. B005PPM

      Remove the 2 bolts.

    2. Disengage the 2 guides to remove the back door lower stay reinforcement LH.

  14. REMOVE BACK DOOR LOWER STAY REINFORCEMENT RH

    Tech Tips

    Use the same procedure as for the LH side.

  15. REMOVE BACK DOOR LOWER STOPPER

    Tech Tips

    Use the same procedure for the RH side and LH side.


    1. B005M6X

      Remove the bolt.

    2. Disengage the guide to remove the back door lower stopper.

  16. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

    Click here

  17. REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)

    Tech Tips

    Use the same procedure as for the LH side.

  18. REMOVE REAR SPOILER SIDE PROTECTOR SUB-ASSEMBLY LH

    Click here

  19. REMOVE REAR SPOILER SIDE PROTECTOR SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  20. REMOVE REAR WIPER MOTOR AND BRACKET ASSEMBLY

    Click here

  21. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  22. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY

    Click here

  23. REMOVE LICENSE PLATE LIGHT ASSEMBLY LH

    Click here

  24. REMOVE LICENSE PLATE LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  25. REMOVE MULTIPLEX NETWORK DOOR ECU (w/ Power Back Door)

    Click here

  26. REMOVE POWER BACK DOOR WARNING BUZZER (w/ Power Back Door)

    Click here

  27. REMOVE REAR LIGHT ASSEMBLY LH

    Click here

  28. REMOVE REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  29. REMOVE REAR TELEVISION CAMERA ASSEMBLY

    Click here

  30. REMOVE BACK DOOR LOWER STOPPER CUSHION


    1. B005NXH

      Disengage the 2 claws to remove the back door lower stopper cushion.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  31. REMOVE BACK DOOR DUST PROOF SEAL


    1. B005NPD

      Disengage the 2 claws and guide to remove the back door dust proof seal.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  32. REMOVE BACK DOOR STAY ASSEMBLY LH (w/o Power Back Door)

    Click here

  33. REMOVE BACK DOOR STAY ASSEMBLY RH (w/o Power Back Door)

    Tech Tips

    Use the same procedure as for the LH side.

  34. REMOVE BACK DOOR DAMPER STAY LOWER BRACKET LH (w/o Power Back Door)

    Click here

  35. REMOVE BACK DOOR DAMPER STAY LOWER BRACKET RH (w/o Power Back Door)

    Tech Tips

    Use the same procedure as for the LH side.

  36. REMOVE POWER BACK DOOR UNIT SET ASSEMBLY LH (w/ Power Back Door)

    Note

    Do not apply any horizontal load to the power back door unit set assembly in order to prevent the piston rod from deforming.


    1. B005L5NC02
      *a Grommet

      Disconnect the connector.

    2. Disengage the grommet.

    3. B005MTM

      Remove the 4 bolts and power back door unit set assembly.

      Note

      Remove the power back door unit set assembly while supporting the back door by hand.

  37. REMOVE POWER BACK DOOR UNIT SET ASSEMBLY RH (w/ Power Back Door)

    Tech Tips

    Use the same procedure as for the LH side.